Manuals / LG Electronics / Kitchen Appliance / Microwave Oven

LG Electronics 3828W5U0492 Prepare The Electrical Connections, This appliance MUST be grounded

Models: 3828W5U0492

1 20

Download 20 pages 20 Kb

Page 7

Image 7

STEP 1: PREPARE THE ELECTRICAL CONNECTIONS

W A R N I N G

AVOID ELECTRICAL SHOCK! THIS APPLIANCE MUST BE GROUNDED!

1.Locate the grounded electric outlet for this oven in the cabinet above the oven, as shown in Figure 5.

NOTE: The outlet should be on a circuit dedicated to the microwave oven (120V, 60 Hz., AC only) with a 15 or 20A fused electrical supply.

IMPORTANT: If you do not have the proper wall outlet, you MUST have one installed by a qualified electrician.

2.You will cut the power-supply-cord hole (shown in Figure 5) later when you prepare the wall and upper cabinet in Step 4.

NOTE: Do not use an extension cord.

Keep the power cord dry and do not pinch or crush it.

Upper

Cabinet

Grounded Outlet

(Inside Cabinet)

Power-Supply-Cord Hole

Figure 5

W A R N I N G

Improper grounding could result in electric shock or other personal injury.

DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THE POWER SUPPLY CORD GROUNDING PRONG!

This appliance MUST be grounded!

– 7 –

Page 7

Image 7

LG Electronics 3828W5U0492 Prepare The Electrical Connections, Avoid Electrical Shock! This Appliance Must Be Grounded

Contents

http//us.lgservice.com PLEASE READ AND SAVE THESE INSTALLATION INSTRUCTIONSP/NO. 3828W5U0492 INSTALLATION INSTRUCTIONSIF YOU DO NOT DISCONNECT THE POWER, YOU RECEIVE AN ELECTRICAL SHOCK YOUR SAFETY FIRSTFor Your Safety Proper installation is the installers responsibilityDO NOT USE A FUSE IN THE NEUTRAL OR GROUNDING CIRCUIT POWER SUPPLY CORD GROUNDING PRONGTHIS APPLIANCE MUST BE GROUNDED DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THEYOUR SAFETY FIRST If you do not mount the oven as instructedyou risk personal injury and/or property damage MAKE SURE YOU HAVE ENOUGH SPACE AND SUPPORTPARTS, TOOLS, MATERIALS Damper/duct connectorOne power cord clamp and One dark-colored mounting screw to hold the power cordPARTS, TOOLS, MATERIALS You will need the following tools and materials for the installationThis appliance MUST be grounded Power-Supply-Cord HoleSTEP 1 PREPARE THE ELECTRICAL CONNECTIONS AVOID ELECTRICAL SHOCK! THIS APPLIANCE MUST BE GROUNDEDWall Venting REMEMBER AS YOU INSTALL THE VENTINGSTEP 2 PREPARE THE VENTING SYSTEM THIS OVEN MUST BE PROPERLY VENTEDFor 3 1/4x10 SYSTEMS Standard FittingsDuct Length ExamplesBefore You Start Room-Vented recirculating InstallationWall-Vented Installation STEP 3 PREPARE THE VENTINGRoof-Vented Installation Measure And Track/Tape Up The Templates STEP 4 PREPARE THE WALL & UPPER CABINETW A R N I N G W A R N I N G To avoid risk of personal injury, electrical shock or deathW A R N I N G The Oven Must Be Connected To At Least One Wall Stud STEP 5 INSTALL THE MOUNTING PLATEBack Plate 3 pieces mounting plate Locking Tabs Guides For Wall-Ventedpower cord power cord hole STEP 6 ATTACH THE OVEN TO THE WALLW A R N I N G STEP 6 ATTACH THE OVEN TO THE WALL 5. Roof venting installation See FigureMEMO Page Printed in Korea