4.Reassemble the blower wire. See Figure 15.
5.Rotate the unit so that the exhaust ports face the rear of the cabinet. See Figure 17. When you insert blower unit, blower wire must be like figure 16.
6.Place blower unit back into cabinet. Check that the exhaust ports face towards the rear of the cabinet. See Figure 17.
7.Reattach the blower plate to cabinet so the exhaust ports and blower plate opening are aligned. Attach with one blower unit mounting screw and then one blower plate mounting screw. See Figure 18.
| blower |
|
|
| unit |
|
|
| exhaust |
|
|
Figure 15 | ports | exhaust | Figure 17 |
Figure 16 | ports | ||
|
|
|
Roof-Vented Installation:
1.Remove one blower unit mounting screw and one or two blower plate screw(s). Remove the blower plate from cabinet. See Figure 19.
2.Use side cutter or thin snips to cut and remove knockouts "A" from Blower plate. Discard knockouts. Be careful not to distort the plate. See Figure 20.
3.Carefully lift the blower unit out of the microwave oven.
4.Rotate blower unit 90° so the exhaust ports face the top of the cabinet. See Figure 21.
5.Reassemble the blower wire.
6.Place blower unit back into microwave oven.
7.Reattach blower plate to microwave oven. Attach with the one blower unit mounting screw and then the one or two blower plate mounting screw(s). See Figure 22.
| blower plate |
| mounting screw (option) |
| blower plate |
blower unit |
|
| back plate |
blower unit | blower unit |
exhaust ports | mounting screw (option) |
Figure 18
| blower plate |
| mounting screw (option) |
blower unit | blower plate |
| |
| back plate |
| blower unit |
parts “B” | mounting screw (option) |
|
8. Attach the exhaust adapter to the blower plate by sliding it into | Figure 19 | |
the Guide. See Figure 23. |
|
|
| Knockouts “A” | |
|
| |
|
|
|
blower plate
blower unit
blower | blower plate | |
unit | ||
| ||
Figure 21 | Figure 22 |
– 11 –
Figure 20
blower plate
mounting screw (option)
blower unit mounting screw (option)
Figure 23
Exhaust adapter
Back of oven
