Manuals
/
LG Electronics
/
Kitchen Appliance
/
Microwave Oven
LG Electronics
installation instructions P/NO. 3828W5U0492, Microwave Oven
Models:
3828W5U0492
1
1
20
20
Download
20 pages
20 Kb
1
2
3
4
5
6
7
8
<
>
Install
Safety
Power Supply Cord Grounding Prong
Damper/duct connector
Page 1
Image 1
http://us.lgservice.com
MICROWAVE OVEN
INSTALLATION INSTRUCTIONS
PLEASE READ AND SAVE THESE INSTALLATION INSTRUCTIONS.
P/NO.: 3828W5U0492
Page 2
Page 1
Image 1
Page 2
Contents
P/NO. 3828W5U0492
PLEASE READ AND SAVE THESE INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
http//us.lgservice.com
For Your Safety
YOUR SAFETY FIRST
Proper installation is the installers responsibility
IF YOU DO NOT DISCONNECT THE POWER, YOU RECEIVE AN ELECTRICAL SHOCK
THIS APPLIANCE MUST BE GROUNDED
POWER SUPPLY CORD GROUNDING PRONG
DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THE
DO NOT USE A FUSE IN THE NEUTRAL OR GROUNDING CIRCUIT
you risk personal injury and/or property damage
If you do not mount the oven as instructed
MAKE SURE YOU HAVE ENOUGH SPACE AND SUPPORT
YOUR SAFETY FIRST
One power cord clamp and
Damper/duct connector
One dark-colored mounting screw to hold the power cord
PARTS, TOOLS, MATERIALS
PARTS, TOOLS, MATERIALS
You will need the following tools and materials for the installation
STEP 1 PREPARE THE ELECTRICAL CONNECTIONS
Power-Supply-Cord Hole
AVOID ELECTRICAL SHOCK! THIS APPLIANCE MUST BE GROUNDED
This appliance MUST be grounded
STEP 2 PREPARE THE VENTING SYSTEM
REMEMBER AS YOU INSTALL THE VENTING
THIS OVEN MUST BE PROPERLY VENTED
Wall Venting
Duct Length
Standard Fittings
Examples
For 3 1/4x10 SYSTEMS
Wall-Vented Installation
Room-Vented recirculating Installation
STEP 3 PREPARE THE VENTING
Before You Start
Roof-Vented Installation
Measure And Track/Tape Up The Templates
STEP 4 PREPARE THE WALL & UPPER CABINET
W A R N I N G
W A R N I N G
To avoid risk of personal injury, electrical shock or death
W A R N I N G
The Oven Must Be Connected To At Least One Wall Stud
STEP 5 INSTALL THE MOUNTING PLATE
Back Plate 3 pieces mounting plate Locking Tabs Guides
For Wall-Vented
power cord power cord hole
STEP 6 ATTACH THE OVEN TO THE WALL
W A R N I N G
STEP 6 ATTACH THE OVEN TO THE WALL
5. Roof venting installation See Figure
MEMO
Page
Printed in Korea