CONTROLLING THE MULTIPLE PRODUCT 77
23. Key (Command: m c)
To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data
Key code : Refer to ‘IR CODES’.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
24.Fail Over Select (Command: m i) To select Fail Over mode.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data
00:Off
01:Auto
02:Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
25.Fail Over Input Select (Command: m j) To select fail over mode.
* Only available in Fail Over manual mode.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3]
[ ][Data4][Cr] Data(Priority 1~4)
60:RGB
70:
90:HDMI
C0: Display Port
* Use 0x70 as data for
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
26.Automatic Standby (Command: m n) To set the Automatic Standby function.
Transmission
[m][n][ ][Set ID][ ][Data][Cr] Data
00:Off(Not using the Automatic Standby function)
01:4 Hours(The monitor will be off in 4 hours.)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
27.Tile Mode Check (Command: d z) To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data
FF: Check Tile Mode status
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] Data1
00:Tile Mode Off
01:Tile Mode On Data2
00 to 0F: Tile Row Value Data3
00 to 0F: Tile Column Value
