LG Electronics 47WS50MS, 42WS50MS Controlling the Multiple Product, Connecting the cable

CONTROLLING THE MULTIPLE PRODUCT 69

CONTROLLING THE MULTIPLE PRODUCT

yyUse this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC.

yyIn the Option menu, Set ID must be between 1 and 255 without being duplicated.

Connecting the cable

Connect the RS-232C cable as shown in the picture.

yyThe RS-232C protocol is used for communication between the PC and product. You can turn the product on/off, select an input source or adjust the OSD menu from your PC.

RS-232C Cable

(not included)

PC

Monitor 1 Monitor 2 Monitor 3 Monitor 4

ENGLISH

RS-232C Configurations

7-Wire Configurations (Standard RS-232C cable)

		PC		Set
RXD		2		3	TXD
TXD		3		2	RXD
GND		5		5	GND
DTR		4		6	DSR
DSR		6		4	DTR
RTS		7		8	CTS
CTS		8		7	RTS
	D-Sub 9		D-Sub 9
(Female)			(Female)

3-Wire Configurations (Not Standard)

		PC		Set
RXD		2		3	TXD
TXD		3		2	RXD
GND		5		5	GND
DTR		4	6		DSR
			4
DSR		6			DTR
			7
RTS		7			CTS
			8
CTS		8			RTS
	D-Sub 9		D-Sub 9
(Female)			(Female)

Communication Parameter

yyBaud Rate : 9600 buad Rate (UART)

yyData Length : 8 bit

yyParity Bit : None

yyStop Bit : 1bit

yyFlow Control : None

yyCommunication Code : ASCII code yyUse a crossed (reverse) cable