APPENDIX
APPENDIX
*Real data mapping 1
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63 : Step 99 (SET ID 99)
64 : Step 100
10. Color (Command2:i)
To adjust the screen color
You can also adjust color in the Picture menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’ See page 96. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
11. Tint (Command2:j)
To adjust the screen tint.
You can also adjust tint in the Picture menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’ See page 96. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
12. Sharpness (Command2:k)
To adjust the screen sharpness.
You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’ See page 96. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
13. OSD Select (Command2:l)
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off Data 1: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
14. Remote Control Lock Mode (Command2:m)
To lock the remote control and the front panel controls on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off | Data 1: Lock on |
|
|
Acknowledgement [m][ | ][Set ID][ ][OK/NG][Data][x] |
|
|
If you’re not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released.
15Treble (Command2:r) To adjust treble.
You can also adjust treble in the Audio menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’ See page 96. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
16.Bass (Command2:s) To adjust bass.
You can also adjust bass in the Audio menu. Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’ See page 96. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
17.Balance (Command2:t) To adjust balance.
You can also adjust balance in the Audio menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’ See page 96. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
18.Color Temperature (Command2:u)
To adjust color temperature.
You can also adjust color temperature in the Picture menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0: Medium 1: Cool 2: Warm 3: User Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
96
