01.Power (Command2:a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off Data 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
*In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.
*Note: In this model, TV will send the Acknowledge after power on processing completion.
There might be a time delay between command and acknowledge.
02. Input Select (Command2:b)
To select input source for the TV.
Transmission [k][b][ ][Set ID][ ][Data][Cr]
Data 0: DTV | Data 1: Analog |
Data 2: AV1 | Data 3: AV2 |
Data 4: Component 1 | Data 5: Component 2 |
Data 7: | Data 8: HDMI1 |
Data 9: HDMI2 |
|
|
|
Acknowledgement [b][ | ][Set ID][ ][OK/NG][Data][x] |
|
|
*You can select HDMI3 using (command x b).
*If you select input source, we command (command x b).
03.Input select(Command: x b) To select input source for TV. Transmission [x][b][][Set ID][][Data][Cr]
Data 00 : DTV (Antenna) | Data 01 : DTV (Cable) | ||
Data 10 : Analog (Antenna) | Data 11 : Analog (Cable) | ||
Data 20 | : AV1 | Data 21 | : AV2 |
Data 40 | : Component 1 | Data 41 | : Component 2 |
Data 60 : | Data 90 : HDMI1 | ||
Data 91 : HDMI2 | Data 92 : HDMI3 | ||
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
04. Aspect Ratio (Command2:c) (Main picture format) To adjust the screen format.
You can also adjust the screen format using the RATIO button on remote control or in the Picture menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 1: 4:3 | 4: Zoom 1 |
2: 16:9 | 5: Zoom 2 |
| 6: Set by program |
| Reserved |
|
|
Acknowledgement [c][ | ][Set ID][ ][OK/NG][Data][x] |
|
|
05.Screen Mute (Command2:d) To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 0 : Screen mute off (Picture on)
Data 1 : Screen mute on (Picture off) Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
06. Volume Mute (Command2:e) To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 0 : Volume mute on (Volume off) Data 1 : Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
07. Volume Control (Command2:f) To adjust volume.
You can also adjust volume with the volume buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64(*transmit by Hexadecimal code) Refer to ‘Real data mapping 1’ as shown below. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
08.Contrast (Command2:g) To adjust screen contrast.
You can also adjust contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’ as shown below. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
09.Brightness (Command2:h) To adjust screen brightness.
You can also adjust brightness in the Picture menu. Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’ as shown below. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
95
