LG Electronics 47LBX, 42LBX, 52LBX owner manual Transmission kw Set IDDataCr

19.Red adjustment(Command:v)

To adjust red in color temperature Transmission [k][v][ ][Set ID][][Data][Cr] Data Min:0 ~ Max:C8

*Refer to "Real data mapping 2". See page 97 Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]

20.Green adjustment(Command:w)

To adjust green in color temperature.

Transmission [k][w][ ][Set ID][][Data][Cr]

Data Min:0 ~ Max:C8

*Refer to "Real data mapping 2". See page 97 Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x]

21. Blue adjustment(Command:$)

To adjust blue in color temperature.

Transmission [k][$][ ][Set ID][][Data][Cr]

Data Min:0 ~ Max:C8

*Refer to "Real data mapping 2". See page 97 Acknowledgement [$][ ][Set ID][][OK/NG][Data][x]]

*Real data mapping 2 0 : -20

5 : -19

A : -18

5F: -1

64:0

69:+1

C3 : +19

C8 : +20

22.Tune Command (Command: m a)

To tune channel to following physical/major/minor num ber

Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1] [ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]

Data 0: Physical Channel Number(Transmit by

Hexadecimal code)

NTSC air:02~45

NTSC cable: 01, 0E~7D

ATSC air:01~45

ATSC cable:01~87

Data1,Data2: Major Channel Number (two part) /

Channel Number (One part)

Data1: High byte

Data2: Low byte

Two part channel number:

Major number-Minor number

One part channel number:

If the channel band is ATSC digital cable, it can be used. In case of using one part channel num- ber, minor channel does not need.

Data3, Data 4: Minor Channel Number

Data3: High byte , Data4: Low byte

APPENDIX

97