14USING THE MONITOR

USING THE MONITOR SET

ENGLISH

Connecting to a PC

Your Monitor supports the Plug & Play* feature.

*Plug & Play: A PC will have a built-in driver for the monitor, no extra software is needed.

NOTE

yyIt is recommended you use an HDMI connection for the best image quality.

yyUse a shielded signal interface cable, such as D-sub 15 pin signal cable and DVI/HDMI cable, with a ferrite core to maintain standard compliance for the product.

yyIf you turn the Monitor set on when the set is cold, the screen may flicker. This is normal. yySome red, green, or blue spots may appear

on the screen. This is normal.

yyIf you use a cable longer than the D-sub 15 pin signal cable provided, certain images may appear blurry.

CAUTION

yyConnect the signal input cable and tighten it by turning the screws clockwise.

yyDo not press the screen with your finger for a long time as this may result in temporary distortion on the screen.

yyAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

RGB connection

Transmits an analog video signal from your PC to the Monitor. Connect the PC and the Monitor with the 15 pin signal cable as shown an following illustration.

Select RGB input.

Back of the product.

(not included)

PC/MAC

Macintosh Adapter (not included)

NOTE

yyUse the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system)

yyApple computers may require an adapter to connect to this monitor. Call or visit their web site for more information.

Page 15
Image 15
LG Electronics 42WL10MS, 47WL10MS owner manual Using the Monitor SET, Connecting to a PC, RGB connection