LG Electronics 42WL10MS, 47WL10MS owner manual Reset Command f k, Tile Mode Command d d

76CONTROLLING THE MULTIPLE PRODUCT

ENGLISH

37.Fail Over Input Select (Command: m j) To select the input source for auto switch.

* This command is only available when the fail over (auto) mode is set to Custom.

Transmission

[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]

[ ][Data4][ ][Data5][Cr]

Data 1 to 5 (Priority 1 to 5)

60:RGB

70:DVI-D

90:HDMI(HDMI1) C0: Display Port

91:HDMI2/SDI

* The number of data items differs depending on the model.

Acknowledgement

[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]

[ ][Data5][x]

Data 1 to 5 (Priority 1 to 5)

60:RGB

70:DVI-D

90:HDMI(HDMI1) C0: Display Port

91:HDMI2/SDI

* The number of data items differs depending on the model.

38.Reset (Command: f k)

To execute the Picture, Screen, Audio and Factory reset function.

Transmission

[f][k][ ][Set ID][ ][Data][Cr] Data 00: Picture Reset

01:Screen Reset

02:Factory Reset

03:Audio Reset

Acknowledgement

[k][ ][Set ID][ ][OK/NG][Data][x]

39.Tile Mode (Command: d d)

To set a Tile Mode and Tile Column/ Row values.

Transmission

[d][d][ ][Set ID][ ][Data][Cr]

Data 00 to FF: 1st byte - Tile Row 2nd byte - Tile Column

*00, 01, 10, 11 means Tile Mode Off. Acknowledgement

[d][ ][Set ID][ ][OK/NG][Data][x]

** It may not be supported depending on the model.

40.Tile Mode Check (Command: d z) To check Tile Mode status.

Transmission

[d][z][ ][Set ID][ ][Data][Cr]

Data FF: Check Tile Mode status.

**It may not be supported depending on the model. Acknowledgement

[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

Data1 00: Tile Mode Off

01:Tile Mode On Data2 00 to 0F: Tile Row Data3 00 to 0F: Tile Column

41.Tile ID (Command: d i) To set Tile ID.

Transmission

[d][i][ ][Set ID][ ][Data][Cr]

Data 01 to E1: Tile ID 01 to 225**

FF:Check Tile ID

**Data could not be set over (Tile Column) x (Tile Row).

**It may not be supported depending on the model.

Acknowledgement

[i][ ][Set ID][ ][OK/NG][Data][x]

*NG will be return if data is over (Tile Column) x (Tile Row), except 0xFF.

42.Tile H Position (Command: d e) To adjust the Tile Horizontal position.

* This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On.

Transmission

[d][e][ ][Set ID][ ][Data][Cr]

Data 00 to 32: -50 (Left) to 0 (Right) *Left/Right values depend on Tile H size.

**It may not be supported depending on the model. Acknowledgement

[e][ ][Set ID][ ][OK/NG][Data][x]