LG Electronics 47WL10MS Power Command k a Energy Saving Command j q, Input Select Command x b

			CONTROLLING THE MULTIPLE PRODUCT 69
01. Power (Command: k a)		04. Energy Saving (Command: j q)
To control the Power On/Off the display.			To set the Energy Saving function.
Transmission		Transmission
[k][a][ ][Set ID][ ][Data][Cr]		[j][q][ ][Set ID][ ][Data][Cr]
Data 00 : Off			Data 00: Off
	01 : On		01: Minimum
			02: Medium
	Acknowledgement
			03. Maximum
	[a][ ][Set ID][ ][OK/NG][Data][x]
			04: Auto
* Only when the monitor set is fully powered on, the
			05. Screen Off
Acknowledgement signal is returned properly.
			Acknowledgement
* There may be a certain time of delay between the
			[q][ ][Set ID][ ][OK/NG][Data][x]
Transmission and Acknowledgement signals.
			** It may not be supported depending on the model.

02.Input Select (Command: x b)

To select the Input Source for display.

	Transmission
	[x][b][ ][Set ID][ ][Data][Cr]
Data 20: Input (AV)
	40: Component	05. Picture Mode (Command: d x)
	60: RGB		To select the Picture Mode.
	70: DVI-D(PC)
		Transmission
	80: DVI-D(DTV)
		[d][x][ ][Set ID][ ][Data][Cr]
	90: HDMI(HDMI1)(DTV)
	A0: HDMI(HDMI1)(PC)		Data 00: Vivid
	C0: Display Port(DTV)		01: Standard
	D0: Display Port(PC)		02. Cinema
	91: HDMI2/SDI(DTV)		03. Sport
	A1: HDMI2/SDI(PC)		04: Game
	B0: SuperSign
			Acknowledgement
Acknowledgement		[x][ ][Set ID][ ][OK/NG][Data][x]
	[b][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH

*Some input signals may not be supported depending on the model.

03.Aspect Ratio (Command: k c)

To adjust the screen format.

Transmission

[k][c][ ][Set ID][ ][Data][Cr] Data 01: 4:3

02:16:9

04:Zoom

09:Just scan (720p or more)

(Component, HDMI/ DVI-D/ Display Port DTV) * RGB, DVI-D, HDMI/Display Port PC mode (1:1)

10 to 1F: Cinema Zoom 1 to 16 (AV, Component, HDMI DTV)

* Available data types differ depending on the input signal. For more information, see the aspect ratio section of the owner's manual.

* The aspect ratio may differ depending on the model's input configuration.

Acknowledgement

[c][ ][Set ID][ ][OK/NG][Data][x]

06.Contrast (Command: k g) To adjust the screen contrast.

Transmission

[k][g][ ][Set ID][ ][Data][Cr]

Data 00 to 64: Contrast 0 to 100 Acknowledgement

[g][ ][Set ID][ ][OK/NG][Data][x]