Maintenance
Removal of Gas Appliance
Gas appliance connectors used to connect this appliance to the gas supply are not designed for continuous movement. Once installed, DO NOT repeatedly move this gas appliance for cleaning or to relocate. If this appliance has to be moved and/or removed for servicing, follow the procedure described in the installation instructions. For information, contact Maytag Customer Assistance at
To prevent range from accidentally tipping, range must be secured to the floor by sliding rear leveling leg into the anti- tip bracket.
Storage Drawer
CAUTION
Do not store plastic, paper products, food or flammable materials in this drawer. The drawer may become too warm for these items when the oven is in use.
The storage drawer can be removed to allow you to clean under the range.
To remove:
1.Empty drawer and pull out to the first stop position.
2.Lift up the front of the drawer.
3.Pull out to the second stop position.
4.Grasp sides and lift drawer up and out.
To replace:
1.Fit the ends of the drawer glides into the rails in the range.
2.Lift up the front of the drawer and gently push in to the first stop position.
3.Lift drawer up again and push until drawer is closed.
Oven Bottom
Protect oven bottom against spillovers, especially acidic or sugary spills, as they may discolor the porcelain enamel. Use the correct pan size to avoid spillovers and boilovers.
The oven bottom may be removed for easier cleaning.
To remove:
When cool, remove the oven racks. Slide the two |
| |
catches, located at each rear corner of |
| |
the oven bottom, toward the front of the | 1 | |
oven. | ||
2 | ||
Lift the rear edge of the oven bottom |
| |
slightly, then slide it back until the front |
| |
edge of the oven bottom clears the | 3 | |
oven front frame. Remove oven bottom |
| |
from oven. |
|
To replace:
Fit the front edge of the oven bottom into the oven front frame. Lower the rear of the oven bottom and slide the two catches back to lock the oven bottom in place.
23
