Troubleshooting, Problem, Solution | LG Electronics 800 instruction

Manual background Troubleshooting

PROBLEM	SOLUTION
Oven did not clean properly.	• Longer cleaning time may be needed.
	• Excessive spillovers, especially sugary and/or acidic foods, were not removed prior
	to the self-clean cycle.

Oven door will not unlock after	• Oven interior is still hot. Allow about one hour for the oven to cool after the
self-clean cycle.	completion of a self-clean cycle. The door can be opened when the LOCK indicator
	word is not displayed.
	• The control and door may be locked. See page 8.

Moisture collects on oven	• This is normal when cooking foods high in moisture.
window or steam comes from	• Excessive moisture was used when cleaning the window.
oven vent.

There is a strong odor or light	• This is normal for a new range and will disappear after a few uses. Initiating a clean
smoke when oven is turned on.	cycle will “burn off” the odors more quickly.
	• Turning on a ventilation fan will help remove the smoke and/or odor.
	• Excessive food soils on the oven bottom. Use a self-clean cycle.

Fault Codes	• BAKE or LOCK may flash rapidly in the display to alert you if there is an error
	or a problem. If BAKE or LOCK appear in the display, press the CANCEL pad.
	If BAKE or LOCK continue to flash, disconnect power to the appliance.
	Wait a few minutes, and then reconnect power. If the flashing still continues,
	disconnect power to the appliance and call an authorized servicer.
	• If the oven is heavily soiled, excessive flareups may result in a fault code during
	cleaning. Press the CANCEL pad and allow the oven to cool completely, wipe out
	excess soil, then reset the clean cycle. If the fault code reappears, contact an
	authorized servicer.

Noises may be heard.	• The oven makes several low level noises. You may hear the oven relays as they go on
	and off. This is normal.
	• As the oven heats and cools, you may hear sounds of metal parts expanding and
	contracting. This is normal and will not damage your appliance.

There are no beeps and	• Oven may be in Sabbath Mode. See page 14.
no display.

“SAb” flashing and then	• Oven is in Sabbath Mode. To cancel, press and hold the Clock pad for five
displayed continuously.	seconds.

25

Image 26

LG Electronics 800 important safety instructions Troubleshooting, Problem, Solution

Contents

Care & Cleaning Table of ContentsImportant Safety Maintenance Instructions Important SafetyRecognize Safety Symbols, Words, Labels General Instructions To Prevent Fire or Smoke Damage Important Safety InstructionsChild Safety In Case of Fire Cooking Safety Utensil Safety Important Safety Notice and Warning Cleaning SafetySelf-CleanOven Save These Instructions for Future Reference Surface Cooking Operating During a Power FailureSetting the controls Surface Controls Sealed Burners Surface CookingCooktop Burner Grates Control Panel Using the TouchpadsOven Cooking Clock To cancel the Clock display TimerFault Codes To restore the Clock display Baking Notes BakingBaking with Convection Baking Differences Between Your Old and New Oven To set Convect Roast Roasting With ConvectionRoasting Notes Cook & Hold When the cooking time has elapsedTo cancel Cook & Hold at any time Delay Cook & Hold Broil Notes Broiling ChartBroiling To set Broil Keep Warm Notes To cancel Keep WarmKeep Warm To set Keep Warm Sabbath Mode Notes To cancel the Sabbath ModeAutomatic Shut-Off/SabbathMode To cancel a Favorite cycle in progress Adjusting the Oven TemperatureTo adjust the oven temperature Changing Temp F/C Oven Racks Oven FanOven Vent Oven Light Create-A-SpaceTM Half Rack Baking Layer Cakes on Two Racks To set Self-Clean Care & CleaningBefore Self-Cleaning To Delay a Self-CleanCycle Smoke and Smells During the Self-CleanCycleAfter Self-Cleaning Sounds PROCEDURE Care & CleaningCleaning Procedures PART PART Oven Window MaintenanceOven Door Leveling Legs Removal of Gas Appliance Storage Drawer SOLUTION TroubleshootingPROBLEM SOLUTION Notes If You Need Service Warranty & ServiceWhat is Not Covered By These Warranties Full One Year Warranty - Parts and Labor Table des matières Guide d’utilisation et d’entretienCuisinière à gaz à touches de précision Instructions de sécurité AVERTISSEMENT Instructions de sécurité importantes En cas d’incendie Instructions de sécurité importantesInstructions générales Sécurité pour les enfants Familiarisation avec l’appareil Cuisson et sécurité Ustensiles et sécurité Nettoyage et sécurité Four autonettoyant Avertissement et avis important pour la sécurité Réglage des commandes Commandes de la surface de cuissonBoutons de commande de la surface de cuisson Cuisson sur la surface Brûleurs de haute performance Surface de cuissonBrûleurs scellés Brûleur de mijotage Utilisation des touches Tableau de commandeCuisson dans le four Horloge Minuterie Verrouillage des commandes et de la porte du fourCuisson dans le four Réglage de l’horloge Cuisson courante Cuisson dans le fourCodes d’anomalie Cuisson avec convection Programmation du rôtissage avec convection Rôtissage avec convectionRemarques sur le rôtissage Programmation de Cuisson et maintien Cuisson et maintienCuisson et maintien différés Lorsque la durée de cuisson s’est écoulée Programmation du Maintien au chaud Maintien au chaudRemarques sur la fonction de maintien au chaud Annulation du maintien au chaud Tableau de cuisson au gril Cuisson au grilRemarques sur la cuisson au gril Programmation de la cuisson au gril Annulation du mode sabbat Arrêt automatique/Mode sabbatRemarques sur le mode sabbat Favori Ajustement de la température du fourChangement de la température F/C Ajustement de la température du four Ventilateur du four RéinstallationAllumage sans flamme de veille Évent du four Demi-grille Create-A-SpaceTM Cuisson de gâteaux à étages sur deux grilles Programmation de l’autonettoyage NettoyageAvant l’autonettoyage Démarrage différé d’un cycle d’autonettoyage Fumée et odeurs Après le cycle d’autonettoyagePendant le cycle d’autonettoyage Bruits NETTOYAGE Méthodes de nettoyagePIÈCE NETTOYAGE Hublot du four EntretienPorte du four Raccordement électrique Dépose Déplacement d’un appareil à gazTiroir de remisage Recherche des pannes PROBLÈME PROBLÈME Si l’intervention d’un réparateur est nécessaire Garantie et service après-venteNe sont pas couverts par ces garanties Résidents canadiens Precisión Sensible al Tacto Guía de Uso y CuidadoEstufa a Gas con Control a Tabla de Materias ADVERTENCIA InstruccionesSeguridad PRECAUCIÓN En Caso de Incendio Instrucciones Importantes sobre SeguridadInstrucciones Generales Seguridad para los Niños Generalidades Seguridad Para Cocinar Horno Autolimpiante Utensilios ApropiadosSeguridad de la Limpieza Aviso y Advertencia Importante Sobre Seguridad Encendido Sin Piloto Cocinando en la EstufaControles Superiores Perillas de Control de los Elementos Superiores Quemadores de Alto Rendimiento CubiertaQuemadores Sellados Quemador para Cocinar a Fuego Lento Uso de las Teclas Cocinando en el HornoPanel de Control ‘Clock’ Reloj Para cancelar el despliegue del reloj Códigos de Errores‘Timer’ Temporizador Para cancelar el temporizador Notas sobre Horneado HorneadoHorneado por Convección modelos selectos Notas sobre Asado Asado por Convección‘Cook & Hold’ Para programar ‘Cook & Hold’ ‘Cook & Hold’ Diferido Para cancelar ‘Cook & Hold’ en cualquier momento‘Delay Cook & Hold’ Cuando haya expirado el tiempo de cocción Tabla de Asar a la Parrilla ‘Broiling’ Asar a la ParrillaNotas Sobre Asado a la Parrilla Para programar ‘Broil’ Notas sobre ‘Keep Warm’ Para cancelar ‘Keep Warm’‘Keep Warm’ Mantener Caliente Para programar ‘Keep Warm’ Notas Sobre el Modo Sabático Para cancelar el Modo SabáticoCierre Automático/Modo Sabático 72 horas Cambio de la temperatura de F/C Para cancelar un ciclo favorito en progresoAjuste de la temperatura del horno ‘Favorite’ Favorito Parrillas del Horno Encendido sin PilotoVentilador del horno Respiradero del Horno Media Parrilla Create-A-SpaceMR Horneado de Pasteles de Capas en Dos Parrillas Antes de la Autolimpieza Para programar ‘Self-Clean’AutolimpiezaCuidado y Limpieza Para diferir un ciclo de autolimpieza Humo y Olores Durante el ciclo de autolimpiezaDespués del ciclo de autolimpieza Sonidos PIEZA Cuidado y LimpiezaProcedimientos de Limpieza PROCEDIMIENTO DE LIMPIEZA Cuidado y Limpieza Ventana del Horno MantenimientoPuerta del Horno Tornillos Niveladores Para sacar Retiro de la Estufa a GasGaveta de Almacenamiento Para volver a colocar SOLUCION PROBLEMALocalización y Solución de Averías SOLUCION Si Necesita Servicio Garantía y ServicioLo que No Cubren Estas Garantías Residentes Canadienses