20Connecting
Broadband service
2
Connecting
PC
| 2. The [Connection Setting] menu appear on the |
| screen. Use w/sto select the [Wired] and |
Router | press ENTER (b). |
3. Select [Yes] and press ENTER (b) to continue. The new connection settings reset the current network settings.
4. Use w/s/a/dto select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
Rear of the unit
Wired Network Setup
If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.
Preparation
Before setting the wired network, you need to connect the broadband internet to your home network.
1.Select [Connection Setting] option in the [Setup] menu then press ENTER (b).
,,Note
If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using w/s/ a/dand numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.
5.Select [OK] and press ENTER (b) to apply network settings.
6.The player will ask you to test the network connection. Select [OK] and press ENTER (b) to complete the network connection.
7.If you select [Test] and press ENTER (b) at step 5 above, the network connection status is displayed on the screen.
��
4:58:17
