Connections

ips

Depending on your TV and other equipment you wish to connect, there are various ways you could connect the recorder. Use only one of the connections described below.

Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution

Make sure the DVD Recorder is connected directly to the TV. Tune the TV to the correct video input chan- nel.

Do not connect the DVD Recorder’s AUDIO OUT jack to the phono in jack (record deck) of your audio sys- tem.

Do not connect your DVD Recorder via your VCR. The DVD image could be distorted by the copy pro- tection system.

Connecting to the Aerial

Remove the aerial cable plug from your TV set and insert it into the aerial socket at the back of the DVD recorder. Plug one end of the aerial cable into the TV socket on the DVD recorder and the other end into the aerial input socket on your TV set.

RF coaxial connection

Connect the RF. OUT jack on the DVD Recorder to the aerial input jack on the TV using the 75-ohm Coaxial Cable supplied (R). The RF. OUT jack passes the signal through from the AERIAL jack.

Rear of TV

Aerial

 

 

 

SCART INPUT

 

ANTENNA

AUDIO INPUT

VIDEO

INPUT

 

INPUT

 

LR

 

Connections to Your TV

Make one of the following connections, depending on

 

the capabilities of your existing equipment.

HOOKUP

When using the COMPONENT VIDEO OUT jacks,

 

set the VIDEO OUTPUT switch to COMPONENT.

 

When using the SCART jack, set the VIDEO OUT-

 

PUT switch to RGB.

 

SCART connection

DVR

Connect the EURO AV1 AUDIO/VIDEO scart jack on

 

the DVD Recorder to the corresponding in jacks on the

 

TV using the scart cable (T).

 

Video connection

 

Connect the VIDEO OUT jack on the DVD Recorder to

 

the video in jack on the TV using the video cable (V).

 

S-Video connection

 

Connect the S-VIDEO OUT jack on the DVD Recorder

 

to the S-Video in jack on the TV using the S-Video

 

cable (S).

 

Component Video connection

 

Connect the COMPONENT VIDEO OUT jacks on the

 

DVD Recorder to the corresponding input jacks on the

 

TV using an Y Pb Pr cable (C).

 

Audio (Left/Right) Connection

 

Connect the left and right AUDIO OUT jacks of the DVD

 

Recorder to the audio left and right IN jacks on the TV

 

using the audio cables (A). Do not connect the DVD

 

Recorder’s AUDIO OUT jack to the phono in jack

 

(record deck) of your audio system.

 

Rear of TV

SCART INPUT

S-VIDEO

COMPONENT VIDEO INPUT

AUDIO INPUT

VIDEO

INPUT

INPUT

 

 

 

 

 

 

Y

Pb

Pr

L

R

 

R

T

Rear of DVD Recorder

S C A V

Rear of DVD Recorder

15

Page 15
Image 15
LG Electronics DR4912 owner manual Connecting to the Aerial, Connections to Your TV