6
nstallation
I
■Removing packing
Base Packing
Washer
Spanner
1. Remove the cardboard box and
styrofoam packing.
2. Lift the washing machine and remove
the base packing.
3. Remove the tape securing the power
supply cord and drain hose.
4. Remove the inlet hose from the drum.
1. Unscrew the 3 bolts with
the spanner supplied.
2. Take out the 3 bolts along with the
rubber bungs by slightly twisting the
bung.
3. Close the holes with the caps supplied.
Keep the transit bolts for future
use.
To prevent internal damage during transport, the 3 special bolts are locked.
Before operating the washer, remove the bolts along with the rubber bungs.
If they are not removed, it may cause heavy vibration, noise and malfunction.
■Removing transit bolts
Keep the spanner provided for
future use.
Transit bolt
Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
There is a risk of suffocation !
Keep all packaging well away from children.
Warning