nNote
• Ensure the battery is fully charged before first using the
phone.
• Do not remove the battery or SIM card while charging.
• In the case the battery is not properly charged, please turn the
phone off and on using the power key, then recharge the
battery. After detaching and reattaching the battery, please
recharge the battery.

Turning your phone ON

1.Install a battery to the handset and connect the
phone to an external power source such as the
travel adapter, cigarette lighter adapter or hands-
free car kit. Or install a charged battery pack to the
handset.
2. Press for a few seconds until the LCD screen
is turned on.
3. Depending on the status of the PIN code request
setting you may need to enter your PIN code.

Turning your phone OFF

1. Press for a few seconds until the LCD screen
is turned off.
You can use the access codes described in this
section to avoid unauthorised use of your phone. The
access codes (except PUK and PUK2 codes) can be
changed by using the Change codes feature
[Menu 3-6-5]. See page 43.

PIN code (4 to 8 digits)

The PIN (Personal Identification Number) code
protects your SIM card against unauthorised use. The
PIN code is usually supplied with the SIM card. When
the PIN code requestis set to Enable, your phone will
request the PIN code every time the phone is switched
on. When the PIN code requestis set to Disable, your
phone connects to the network directly without the
PIN code.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some SIM cards, is
required to access functions such as Advice of Call
Chargeand Fixed dial number. These functions are
only available if supported by your SIM card. Check
with your network for further information.
Access codesTurning your phone on and off
Getting started
18