ERROR MESSAGE | POSSIBLE CAUSE | REMEDY | |||
FOR ERROR OCCURRENCE | |||||
|
|
|
| ||
|
|
|
|
| |
EXCESS ERROR | The Inlet Valve is troubled. | Replace the Inlet Valve. | |||
|
|
| |||
|
|
| The Controller is troubled. | Repair or replace the Controller. | |
|
|
|
|
|
displayed
Condition
Excessive water is sup- plied than normal water level.(Automatically drain Pump operated.)
THERMAL ERROR |
| |||
|
| The Inlet Water Temperature is | Check the temperature. (Test Mode) | |
|
| |||
|
| very high. (over 194 ) | If the temperature is displayed, | |
|
| Wiring connection is OK? | adjust the Inlet Water | |
|
| |||
displayed | Temperature to 120 . | |||
|
| The Thermistor is OK? | ||
Condition | If the temperature is not | |||
The resistance of ther- | ||||
displayed, | ||||
mistor not normally out put. | ||||
check the wiring connection. | ||||
|
|
| ||
|
|
| check the electric resistance | |
|
|
| of Thermistor. | |
|
|
| (11~14k at 77 ) | |
|
|
| Replace the PCB. |
MOTOR ERROR
displayed
Condition
The Motor is working
abnormally.
Wiring connection is OK?
The Impeller of Washing Pump is locked.
The rotor of Washing Motor is locked.
The Blade is locked.
Check the wiring connection.
Replace the cause of restriction.
Replace the Washing Motor. Replace the PCB.
- 22 -