Step 6: DRAIN LINE CONNECTION
1.If the end of the drain hose does not fit to the drain line, use an adapter (not supplied) that must be resistant to heat and detergent and may be obtained from a plumbing shop.
2.There are 2 typical connections as shown in Figures C & D.
①There may be other options than shown here for connection the drain hose. The drain connection must meet local plumbing regulations.
②The S trap spigot must be drilled out cleanly and free of obstruction to its maximum internal diameter, if used for drainage.
③To prevent syphoning, one of the following instruction methods must be followed:
Figure C: Connection to Disposer or waste Tee.
Drain Requirements
Figure D: Connection to Air Gap.
�Follow local codes and ordinances.
�Do not exceed 10 ft. (3m) distance to drain.
�Do not connect drain lines from other devices to the dishwasher drain hose.
- 31 -
