HDMI Connection
If you have a HDMI TV or monitor, you can connect it to this DVD+VCR using a HDMI cable.
1.Connect the HDMI OUT jack on the DVD+VCR to the HDMI jack on a HDMI compatible TV or monitor (H).
2.Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
3.In stop mode, select HDMI mode by pressing HDMI on the front panel.
“hdmi” will appear on the display window.
Notes :
•No sound will be output from HDMI cable if the [Dolby Digital] or [MPEG] option is not set to PCM.
•The arrow on the cable connector body should be face up for correct alignment with the connector on the DVD+VCR.
•When you use HDMI, the other connections (Yellow VIDEO OUT,
•If there is noise or lines on the screen, please check the HDMI cable.
Tip :
When you use HDMI connection, you can change the resolution (480p, 720p, 1080i) for the HDMI output by pressing RESOLUTION on the front panel. Software incompatibility between this unit and TV/monitor may result in getting only 2 options. 480i is not available. You can only change the resolution within your TV’s and Monitor’s resolution capabilities.
- For DVD/VCR VIDEO OUT connection, a mes- sage will appear if you select an incompatible resolution.
-For
HDMI compatible TV
HDMI
H
Rear of DVD+VCR
About HDMI
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players,
HDMI was developed to provide the technologies of HDCP (High Definition Contents Protection). HDCP is used to protect digital content transmitted and received.
HDMI has the capability to support standard, enhanced, or
HDMI, the HDMI logo and
14