LG Electronics LDX-514 owner manual Preparation, Rear Panel, a b c d e, i j k

Rear Panel

Caution

Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

a b c d e f

g	h	i j k
a ANT.IN		g RF. OUT

Preparation

Connect the VHF/UHF/CATV antenna to this terminal.

bVCR IN LINE 1 (VIDEO/AUDIO (Left/Right))

Connect the audio/video output of an external source (Audio system, TV/Monitor, VCR, Camcorder).

cDVD/VCR OUT (VIDEO/AUDIO (Left/Right))

Connect to a TV with video and audio inputs.

dCOMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD OUT)

Connect to a TV with RF coaxial inputs.

hCOAXIAL (DIGITAL AUDIO OUT jack) (DVD OUT)

Connect to digital (coaxial) audio equipment.

iS-VIDEO OUT (DVD OUT)

Connect to a S-Video Input on TV.

jOPTICAL (DIGITAL AUDIO OUT jack) (DVD OUT)

Connect to a TV with Y Pb Pr inputs.Connect to digital (optical) audio equipment.

e AUDIO OUT (Left/Right) (DVD OUT)	k HDMI OUT
Connect to a TV or other equipment with audio inputs.	HDMI output providing a high quality interface for
f AC Power Cord	digital audio and video.
Plug into the power source.

Preparation

Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, VCR, stereo system or other devices as nec- essary for additional connection information.

Notes:

•The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from each other or turn off the unit after removing the disc.

•Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.

•Do not connect the DVD+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not con- nect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection system.

11