Introduction
To ensure proper use of this product, please read this owner’s manual carefully and retain for future refer- ence.
This manual provides information on the operation and maintenance of your DVD+VCR. Should the unit require service, contact an authorized service loca- tion.
Moisture Condensation
Never operate the DVD+VCR immediately after mov- ing it from a cold location to a warm location. Leave it unplugged for two or three hours without operating it. If you use the DVD+VCR in such a situation, it may damage discs/tapes and internal parts.
About the 
Symbol Display
“
” may appear on your TV display during opera- tion and indicates that the function is not permitted by this unit or the disc.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.
Introduction
Symbol Used in this Manual
Indicates hazards likely to cause harm to the unit itself or other material damage.
Note: Indicates special notes and operating fea- tures.
Tip: Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.
DVD DVD and finalized DVD±R/RW
VCD Video CDs
ACD Audio CDs
MP3 MP3 Discs
WMA WMA Discs
JPEG JPEG Discs
DivX DivX Discs
Storing Discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor pic- ture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or
5
