LG Electronics LDX-514 owner manual Optional TV Connections

RF coaxial connection	Optional TV Connections
Connect the RF.OUT jack on the DVD+VCR to the	These connections support only DVD playback. The
antenna in jack on the TV using the supplied 75-ohm
	tuner and VCR still output through the RF.OUT (R) or
Coaxial Cable (R).
	DVD/VCR OUT (A, V) jacks.

How to set the DVD+VCR’s RF output channel

1.When the DVD+VCR is turned off, press and hold CH (V/v) on the front panel for more than five seconds. “RF03” or “RF04” appears in the display window.

2.Press CH (V/v) to change the RF output channel (RF03 or RF04). Tune the TV to this channel.

3.Turn off the DVD+VCR.

Audio/Video connection

1.Connect the DVD/VCR VIDEO OUT jack on the DVD+VCR to the video in jack on the TV using the video cable supplied (V).

2.Connect the Left and Right DVD/VCR AUDIO OUT jacks on the DVD+VCR to the audio left/right in jacks on the TV (A1) using the supplied audio cables.

Notes:

•If you use this connection, set the TV’s source selector to VIDEO.

•For DVD/VCR VIDEO OUT jack connection, resolution must be set to 480i or 480p by pressing RESOLUTION on the front panel, however DVD/VCR VIDEO OUT is always at 480i standard resolution.

•HDMI mode must be set to OFF for DVD/VCR VIDEO OUT jack connection.

S-Video connection

Connect the S-VIDEO OUT jack on the DVD+VCR to the S-Video in jack on the TV using the optional S-Video cable (S).

Notes:

•For S-Video connection, resolution must be set to 480i or 480p by pressing RESOLUTION on the front panel, however S-VIDEO OUT is always at 480i standard resolution.

•HDMI mode must be set to OFF for S-Video connection.

Component Video / Progressive Scan connection

If your television is a high-definition or “digital ready” television, you may take advantage of the DVD+VCR’s progressive scan output for the highest video resolution possible.

Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD+VCR to the corre- sponding in jacks on the TV using an optional Y Pb Pr cable (C).

Notes:

•You can change the resolution (480i, 480p, 720p, 1080i) for the component/progressive scan video output by pressing RESOLUTION on the front panel.

•For 720p and 1080i resolution, only non-copy protected discs can be played back. If the disc is copy protected, it will be auto down-scaling to 480p resolution.

•HDMI mode must be set to OFF for Component video connections.

•Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack and S-VIDEO OUT jack).

Audio connection

Connect the Left and Right AUDIO OUT jacks of the DVD+VCR to the audio left/right in jacks on the TV using the supplied audio cables (A2).

Preparation

13