Pioneer VSX-43TX Use the Multi JOG to cycle, Cursor through the letters, Numbers and symbols. Use

Fine Tuning Your System

FUNCTION RENAME

Use the FUNCTION RENAME capability to rename the display on the receiver for different functions (DVD, etc.). For example, you could rename DVD/LD as DVR-7000. For this setup in particular using the controls on the front panel is more convenient than using the remote control. Use the MULTI JOG dial instead of the 5∞ buttons and use the ENTER button on the front panel.

3-9		2 RETURN button				5	Use the MULTI JOG to cycle the
							cursor through the letters,
							numbers and symbols. Use the
STANDBY/ON							ENTER button to enter one of the
		STANDBY					possibilities or move forward a
MULTI JOG	ENTER
MOVIE MUSIC
		MULTI JOG CONTROL SIGNAL HI-BIT		SB CH	MIDNIGHT LOUDNESS BAND		space.
		SET UP	RETURN SELECT HI-SAMPLING	MODE
		PHONES	TONE CONTROL
			SPEAKERS TONE BASS/TREBLE
							SIGNAL	dB
							ANALOG
							SB CH
							AUTO ON MOVIE
							OFF MUSIC
							SP A B

(If you are continuing from page 74 you can skip the first two steps.)

1Turn on the receiver. (If you want to use the remote control for this setup, press the RECEIVER button.)

2Press the SET UP button.

SIGNAL dB

ANALOG

SB CH

ON MOVIE

AUTO OFF MUSIC

SP A B

The possible selections are shown below.

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789 !”#$%&’()*+,–./:;<=>?@[ \ ]ˆ_{} [space]

6Repeat step 5 until you get the

name as you want it.

SIGNAL dB

ANALOG

SB CH

ON MOVIE

AUTO OFF MUSIC

SP A B

You can input up to ten characters.

This display appears on the receiver.

3Looking at the display on your receiver, use the MULTI JOG to select FUNCTION RENAME.

Press the ENTER button.

SIGNAL dB

ANALOG

SB CH

ON MOVIE

AUTO OFF MUSIC

SP A B

4Use the MULTI JOG to select the name of the function (for example, DVD/LD) you want to

change. Press ENTER.

SIGNAL dB

ANALOG

SB CH

ON MOVIE

AUTO OFF MUSIC

7Press ENTER repeatedly to exit the name. The new function

name is set.

SIGNAL dB

ANALOG

SB CH

ON MOVIE

AUTO OFF MUSIC

SP A B

8Repeat steps 4-7 to change other function names. Use the MULTI JOG to select EXIT and press

ENTER.

9Use the MULTI JOG to select

EXIT and press ENTER.

This exits the SYSTEM SETUP mode and returns to normal operation.

SP A B

Either the cursor underline bar or a character	memo Use the RETURN button to move the
(depending on which is selected) will blink.	cursor back one character when entering
The functions are divided into three different on-	a name.

78	screen displays so you may have to move
	through them to find the function you want to
	rename.