Pioneer VSX-43TX Assigning the Component Video Inputs, Use the 5∞ buttons to assign a

Fine Tuning Your System

Assigning the Component Video Inputs

This receiver has two component video inputs. Their default settings are video inputs for the DVD/LD (COMPONENT VIDEO IN 1) and TV/SAT (COMPONENT VIDEO IN 2) functions, but you can reassign them if you want to use them as video inputs for other receiver functions (for example a VCR).

See pages 15–18 for more on connecting equipment using component video cords.

	DVD/LD	TV/SAT	VCR/DVR	TV CONT	1
	VCR 2	C D	TUNER	RECEIVER
	MOVIE	MUSIC	ACOUSTIC	INPUT
			EQ
	SURROUND		SB CH	MULTI CH
	MODE		MODE	INPUT
	STEREO/	ENTER	MIDNIGHT
	DIRECT
				MUTE
		MASTER
2		VOLUME
	MENU TUNER EDIT			TOP MENU
	SYSTEM	TUNE		GUIDE
					3-8
	SETUP
	ST		ST
		ENTER
	AUDIO			RETURN

TUNE

3-8 2 RETURN button

5Use the 5∞ buttons to select the component video input you want to reassign. Press the

ENTER button.

SIGNAL dB

ANALOG

SB CH

ON MOVIE

AUTO OFF MUSIC

SP A B

The available component video inputs are: COMPO-1: DVD/LD, COMPO-2: TV/SAT

In the example above, we would select Compo- 1.

The selected component video input blinks.

		6	Use the 5∞ buttons to assign a
STANDBY/ON		STANDBY	receiver function.
MOVIE	MUSIC	ENTER

SIGNAL dB

MULTI JOG

MULTI JOG CONTROL SIGNAL		HI-BIT	SB CH	ANALOG
SET UP	RETURN SELECT	HI-SAMPLING	MODE	MIDNIGHT LOUDNESS BAND
				SB CH
				AUTO ON MOVIE
				OFF MUSIC
PHONES		TONE CONTROL
	SPEAKERS TONE	BASS/TREBLE
				SP A B
				Choose between DVD/LD, TV/SAT, VCR1 and
				VCR2.
				In the example above, we would select VCR1.

(If you are continuing from page 74 you can skip the first two steps.)

1Turn on the receiver, press the RECEIVER button on the remote control.

2Press the SYSTEM SETUP button.

3Looking at the display on your receiver, use the 5∞ buttons to select INPUT ASSIGN. Press the ENTER button.

7When you‘re finished use the 5∞ buttons to select EXIT and

press ENTER.

You will leave the "COMPONENT-IN SELECT" mode.

8Use the 5∞ buttons to select

EXIT and press ENTER, again. Then, use the 5∞ buttons to

select EXIT and press ENTER.

This exits the SYSTEM SETUP mode and returns to normal operation.

SIGNAL dB

ANALOG

SB CH

ON MOVIE

AUTO OFF MUSIC

SP A B

4Use the 5∞ buttons to select

COMPONENT-IN then press

ENTER.

memo

If you connect any source component to the receiver using a component video input, you should also have your TV connected to this receiver's component video output.

EXPERT

SIGNAL dB

ANALOG

SB CH

ON MOVIE

AUTO OFF MUSIC

SP A B

77