Pioneer VSX-43TX operating instructions A/B Speaker Button, Using Other Functions

Using Other Functions

A/B Speaker Button

If you selected NORMAL SYSTEM in the SURRBACK SYSTEM setup (see page 35) your surround back speakers will be used was part of your of main speaker systems and this button will simply switch if off or on. If you selected SECOND ZONE in the SURRBACK SYSTEM setup (see page 35) this button will cycle through the A (main) speaker system, the B speaker system (the surround back speakers acting as a separate second zone), both speaker systems, and off.

MULTI JOG

CONTROL

SIGNAL

HI-BIT

SB CH

MIDNIGHT

LOUDNESS

BAND

CLASS

STATION TUNING

TUNER

SET UP

RETURN

SELECT

HI-SAMPLING

MODE

SELECT

EDIT

PHONES

TONE CONTROL

MULTI JOG/ENTER

SPEAKERS

TONE

BASS/TREBLE

S-VIDEO

VIDEO

L

AUDIO

R

VIDEO INPUT

1

1Press the SPEAKERS button (on the front panel) to switch speakers on/ off or cycle through the different speaker systems if SECOND ZONE or FRONT BI-AMP has been selected in the SURRBACK SYSTEM setup.

A(SP3A):	Sound is output from speaker system A and the same signal is output from the pre out
	terminals.
B(SP3B):	Sound is output from the two speakers in speaker system B (the surround back speakers).
	Multichannel sources will be downmixed to these two speakers.

A&B(SP3AB): Sound is output from speaker system A speakers and the B speakers. Also, for FRONT BI- AMP playback.

OFF(SP3 ): No sound is output from the speakers. Depending on the input signal and settings in SPEAKER SYSTEMS sound may be output from the subwoofer. The same sound is output from the pre out terminals as when selecting speaker system A (above).

memo	• What is output from the subwoofer depends on the SPEAKER SETTING and the type of source.
	• Depending on the settings in SPEAKER SETTING and the MULTI CH IN SELECT, output from the
	SURROUND BACK PRE OUT terminals may change.
	• When using headphones the speakers are switched off.
	• Please use speakers with a nominal impedance rated 8 Ω -16 Ω .

66