White Rodgers HC-TST501CMMS manual Temporary Program Override, Non-Programmable Mode

Using the Thermostat			Advanced Installer Configuration Menu
Programmable Mode			Touch or to step through the list of
If Program days per week is set for 7 (7 days) in the Thermostat Options			equipment submenus. Each equipment
			may have different submenus.
Configuration Menu the thermostat can follow the program entered. Press the
		1	When the equipment submenu you
Run Schedule key. The thermostat will follow the program that you entered or the
factory program.			want is showing in the scrolling
Temporary Program Override	2		message area, touch Installer Config.
			The scrolling message area will show

This feature will override the program temperature setting until the next program			“WORKING”, then change to the first
			parameter on the equipment submenu.
period begins. Touch	or	keys to adjust the temperature. The display will
			Settings for the parameter will also

indicate “Temporary Hold At” to the left of the setpoint temperature. To cancel

the temporary setting before the next period begins, touch Run Schedule to return to the program.

appear on the display.

Example: If you turn up the heat during the Morning program, it will remain at the new temperature until the time for the next period (Day program).

Permanent Temperature Hold	2
	1
The Permanent Temperature Hold feature bypasses the program and allows you
to adjust the temperature manually as needed. The temperature you set in HOLD
will be maintained indefinitely. Touch Run Schedule to cancel HOLD and resume	3
the programmed schedule.

Touchor keys to adjust the temperature. The Hold key will appear on the screen. Touch the Hold key to maintain the new setpoint temperature. ”Hold At” will display to the left of the temperature setpoint. To cancel the permanent hold setting at any time and return to the program, touch Run Schedule.

Example: If you turn up the heat during the Morning program and touch the Hold key, it will remain at the new temperature until you touch Run Schedule or you manually adjust to another temperature.

Non-Programmable Mode

2

If Program days per week is set for 0 Days (Non-programmable) in the Thermostat
Options Configuration Menu, the thermostat will not follow any program periods.
Time of day and day of week will not display. Touch the SYSTEM key to select			3
Heat or Cool and use the	or	buttons to adjust the temperature to your

desired setting.

Touchorto step through the items of the equipment submenu and view settings.

If a setting can be adjusted, the or keys will appear. Change the setting as required. Then touchorto step to the next item. “WORKING” will appear and then the display will show “DONE” to indicate the change is accepted or “FAIL” to indicate the change was not made. The display will return to the fault status screen. Repeat the process.

Some of the parameters being displayed on a submenu are long and switching between the name and the value. Touch the Hold key to momentarily stop the display from switching.