Pioneer VSX-43TX Assigning the Digital Inputs, This exits the DIGITAL-IN Select mode

Fine Tuning Your System

Assigning the Digital Inputs

If you did not hook up your digital equipment in accordance with the default settings for the digital inputs (see page 16,18 & 21) you need to complete the procedure below. You have to do this in order to tell the receiver what digital equipment is hooked up to which terminal so the buttons on the remote correspond to what you have hooked up.

	DVD/LD	TV/SAT	VCR/DVR	TV CONT	1
	VCR 2	C D	TUNER	RECEIVER
	MOVIE	MUSIC	ACOUSTIC	INPUT
			EQ
	SURROUND		SB CH	MULTI CH
	MODE		MODE	INPUT
	STEREO/	ENTER	MIDNIGHT
	DIRECT
				MUTE
		MASTER
2		VOLUME
	MENU TUNER EDIT			TOP MENU
	SYSTEM	TUNE		GUIDE
					3-9
	SETUP
	ST		ST
		ENTER
	AUDIO			RETURN

TUNE

3-9 2 RETURN button

5Use the 5∞ buttons to move through the different digital input settings and press the ENTER

button.

SIGNAL dB

ANALOG

SB CH

ON MOVIE

AUTO OFF MUSIC

SP A B

The available digital input settings are:

DIGI-1: TV/SAT, DIGI-2: CD-R,

DIGI-3: DVD/LD, DIGI-4: CD

The selected setting will blink.

STANDBY/ON
		STANDBY
MOVIE	MUSIC	ENTER

6Use the 5∞ buttons select the component that you hooked up to that digital in. Press the ENTER button.

MULTI JOG

MULTI JOG	CONTROL	SIGNAL	HI-BIT	SB CH	MIDNIGHT	LOUDNESS	BAND
SET UP	RETURN	SELECT	HI-SAMPLING	MODE
PHONES			TONE CONTROL
	SPEAKERS	TONE	BASS/TREBLE

SIGNAL dB

ANALOG

SB CH

ON MOVIE

AUTO OFF MUSIC

SP A B

(If you are continuing from page 74 you can skip the first two steps.)

If you're not sure which component is connected to which digital in, look on the back of the receiver and check the cables you connected.

1Turn on the receiver, press the RECEIVER button on the remote control.

2Press the SYSTEM SETUP button.

3Looking at the display on your receiver, use the 5∞ buttons to select INPUT ASSIGN. Press the

ENTER button.

SIGNAL dB

ANALOG

SB CH

ON MOVIE

AUTO OFF MUSIC

SP A B

4DIGITAL-IN should be selected, if not use the 5∞ buttons to select

it. Press the ENTER button.

	SIGNAL		dB
76	ANALOG
	SB CH	ON	SP A B
	AUTO		MOVIE
		OFF	MUSIC

7Repeat steps 5-6 to change other digital input settings.

8When you're finished use the 5∞ buttons to select EXIT and press

ENTER.

This exits the DIGITAL-IN SELECT mode.

9Use the 5∞ buttons to select

EXIT and press ENTER, again. Then, use the 5∞ buttons to

select EXIT and press ENTER.

This exits the SYSTEM SETUP mode and returns to normal operation.

memo

•The possible digital inputs that can be assigned are: DVD/LD, TV/SAT, VCR1, VCR2, CD, CD-R, MD.

•If you assign a digital input to a certain function (for example DVD/LD) then any digital inputs previously assigned to that function will automatically be set to OFF. This is because one function cannot be assigned to two different places.