Pioneer VSX-43TX Pioneer SR System Operating other Pioneer components, Using System OFF, Receiver

Using Other Functions

Using SYSTEM OFF

Do the following to use the SYSTEM OFF function.

The SYSTEM OFF feature allows you to tell the receiver and your other components to stop and/or turn off with the remote control. Most Pioneer components will automatically turn off. The receiver itself will go off automatically as well.

The following Pioneer components can be turned off using the SYSTEM OFF function: DVD, DVD-Recorder, LD, CATV, CD, CD-R, MD, Satellite Tuner, Tape, Tuner, VCR, and TV.

memo • Be sure to set up each component before programming multi operations (see “Setting Up the Remote Control to Control Other Components“, pages 59–60).

•To exit from the REMOTE SETUP mode at anytime press the REMOTE SETUP button.

RECEIVER MULTI	SYSTEM SOURCE
OPERATION		OFF

	MULTI CONTROL
DVD/LD	TV/SAT	VCR/DVR	TV CONT
VCR 2	C D	TUNER	RECEIVER
MOVIE	MUSIC	ACOUSTIC	INPUT
		EQ

1

1

1Press the MULTI OPERATION button and within 5 seconds press the

RECEIVER button.

All the Pioneer components connected to the receiver and the receiver will stop and/or go off.

SURROUND

MODE

SB CH	MULTI CH
MODE	INPUT

STEREO/

DIRECT ENTER MIDNIGHT

MUTE

The PIONEER SR System: Operating other PIONEER components

Connecting an optional control cord allows you to operate other PIONEER components simply by pointing the receiver's remote control at the remote sensor on the front panel of the receiver. The receiver then sends the remote control signals to the other devices via the CONTROL OUT terminal.

IN

CONTROL

OUT

CONTROL

IN

OUT

Receiver
	PIONEER component
	with an CONTROL
	terminals.
	To CONTROL IN
Remote Control	terminal of another
	PIONEER component
	with an CONTROL
	terminals.

memo • You can also control PIONEER components (and those made by other manufacturers) by pointing the receiver's remote control directly at the respective component. This type of operation does not re- quire control cords. All you have to do is recall the appropriate stored settings (see page 59).

•If you use a remote control hooked up via the CONTROL IN jack with a control cord, you won't be able to use this unit's remote control.

•If you use this feature make sure an analog (audio and/or video) connection has been made between the units.

EXPERT

71