Bridge session and disconnect you from TalkSwitch. If you want to guarantee that TalkSwitch disconnects at the end of a Call Bridge session,
dial 
, then hang up.
If you changed the ‘Special Prefix’ to 
instead of 
, you will need to dial 
to
make another call, and dial 
to return to the Auto Attendant. To enter command mode, you will still need to enter 
.
The Call Bridge telephone number dialed can be any telephone number: local, long distance, toll free (800 and 888) or international. Simply enter the telephone number as you would if you were sitting in your office. For long distance calls, do not forget to include the ‘1’, country code, and area code if applicable.
4.7.2 Using Call Back
The Call Back feature allows you to initiate TalkSwitch to call you at a specified telephone number. This gives you access to any of the following:
•Call Bridge
•Local Extensions, Remote Extensions and Extension Ring Groups
•Voicemail
•Configuration settings
Using Call Back involves 3 easy steps:
1.You call your TalkSwitch telephone number to activate Call Back.
2.You answer and accept the Call Back. (TalkSwitch calls you back within 30 seconds.)
3.At the Auto Attendant you can: choose to perform Call Bridge, dial any extension, access and retrieve voicemail or configure TalkSwitch.
Activating Call Back:
There are two ways to activate Call Back; Prompted and Auto activation:
1.Using ‘Prompted Call Back’ Activation: From your
4.0 | Using TalkSwitch |
97
