3.3.1.5 VoIP Lines

Networked

The TalkSwitch 48-CVA supports 4 VoIP lines per unit. Up to 3 phone numbers can be

 

 

assigned to each of the 4 lines so that unique call handling scenarios can be

 

configured for up to 12 numbers. For example, you might assign a general number

 

for customers to reach the main Auto Attendant greeting and configure up to 11 other

 

numbers so that the inbound calls ring straight through to specific extensions in the

 

office.

In the “Phone numbers” section:

All VoIP Lines are active when the system is first configured. Up to 3 phone numbers can be assigned to each VoIP line for internal calling. Phone numbers need to be assigned so that inbound VoIP calls can be handled according to the configuration parameters set for VoIP lines under the Call Handling section. Phone numbers can be 3 or more digits in length.

Phone numbers 250-299 have special functionalitiy with TalkSwitch. These numbers can be directly dialed from any extension or Auto Attendant and will be automatically routed via VoIP to the destination that has the number assigned to one of its ports. An administrator should keep track of all phone numbers assigned to each location to prevent duplicate numbers being assigned to multiple locations. We recommend that you use these numbers as it will facilitate calling from extensions and the Auto Attendants.

28

TalkSwitch User Manual

Page 38
Image 38
Talkswitch 48-CVA manual Office