3-Way Calling/Conference - The 3-Way Calling/Conference service allows you to add a third party to a call already in progress.

The 3-Way Calling/Conference service enhances TalkSwitch’s capabilities whether you have 1 or more telephone lines. Using 3-Way Calling/Conference service gives you access to TalkSwitch’s Call Forwarding, Call Back and Call Bridge features.

Centrex/Plexar Transfer - The Centrex Transfer service is similar in function to the 3- Way Calling/Conference service. The primary difference is that two external parties can still remain in conversation even after you hang up. TalkSwitch can disconnect after the transfer if you have this service and have enabled the ‘Transfer and clear’ option on the Miscellaneous page located under ‘Options’ in the TalkSwitch software.

Using one telephone line with Centrex Transfer service gives you access to TalkSwitch’s Call Forwarding, Call Back and Call Bridge features.

Hunt or Rollover - When using two or more lines, calls coming in on a busy line can be “rolled over” to an available line in a “hunt” pattern that you can set. There are two types of hunting – Sequential and Circular. Sequential hunting starts at the number dialed and ends in the last number in the assigned group. Circular hunting hunts all the lines in the hunting group, regardless of the starting point. (It will only circle once through the Hunt Group).

TalkSwitch has the same functionality available on all lines and can work in conjunction with the Hunt and Rollover services.

Call Hold and Flash

TalkSwitch uses Flash to put calls on hold. A Flash signal is produced by pressing the Flash or Link button on your telephone (Link is another name for Flash). If you do not have these buttons on your telephone, you can produce a Flash signal by quickly depressing and releasing the telephone’s hangup hook or hook switch.

Single Flash - is pressing the Flash or Link button once. You can also depress and release the telephone’s hangup hook or hook switch once.

Double Flash - is pressing the Flash or Link button twice. You can also depress and release the telephone’s hangup hook or hook switch twice. When using your telephone’s hangup hook to initiate a ‘Double Flash’, do not try to initiate the second Flash too quickly or you may disconnect your caller. Press and release the hangup hook once, count to 2, then initiate the second Flash.

116 TalkSwitch User Manual

Page 122
Image 122
Talkswitch 48-CVA manual Call Hold and Flash