Pioneer VSX-43TX 2Playing a DVD with Surround Sound, 3Play a DVD then adjust the MASTER VOLUME

Easy Setup Guide Part2

2Playing a DVD with Surround Sound

1Make sure the receiver, your TV, your subwoofer and your DVD player are switched ON.

2Press the DVD/LD button on the remote control.

You should see DVD/LD in the display on the receiver.

3Play a DVD then adjust the MASTER VOLUME.

memo To get a more refined sound, make the sound settings in "Expert setup" (starting on page 79).

If you're having trouble getting surround sound playback look at this Frequently Asked Questions (FAQ) guide:

Q1: Even though I'm playing a DVD I'm not getting 5.1 channel playback.

A1: Either the DVD is not set for digital output, or the Dolby Digital/DTS output settings are not correct.

Set the DVD player to output a digital signal and set the Dolby Digital and DTS output properly. If you are unsure how to do this check the DVD initial setup in the manual that came with your DVD player.

Q2: There is no sound from the subwoofer or it is very low.

A2: There is a good possibility you haven't reached a part of the DVD that has an LFE channel (which feeds the subwoofer) yet. The LFE channel only appears in selected parts of the soundtrack. Continue playing and listen for the subwoofer.

If you want to hear more sound from the subwoofer set it to PLUS (see page 37 for more information and consult the memo on page 38).

14