MAINTENANCE
English
Español
CARE &CLEANING | Broiler Pan and Grid | ||
Changing the Oven Light | Do not clean the broiler |
| |
pan or grid in a self- |
| ||
The oven light is a standard | cleaning mode. |
| |
After broiling, remove the | Do not store a soiled broiler | ||
come on when the oven door is open. When the oven door is | |||
closed, press OVEN LIGHT to turn it on or off. It will not | broiler pan from the oven. | pan and grid anywhere in the | |
work during the | Remove the grid from the pan. | range. | |
| Carefully pour out the grease |
| |
To replace: | from the pan into a proper container. | ||
• Make sure oven and bulb are cool. | Wash and rinse the broiler pan and grid in hot | ||
1. Unplug range or disconnect power. | water with a | ||
If food has burned on,sprinkle the grid with cleaner while | |||
2. Turn the glass bulb cover in the back of | |||
hot and cover with wet paper towels or a dishcloth. Soaking | |||
the oven counterclockwise to remove. | |||
the pan will remove | |||
3. Turn bulb counterclockwise to remove from socket. | |||
Both the broiler pan and grid may be cleaned with a | |||
4. Replace bulb and bulb cover by turning clockwise. | |||
commercial oven cleaner. |
| ||
5. Plug in range or reconnect power. |
| ||
Both the broiler pan and grid can also be cleaned in a | |||
| |||
CAUTION | dishwasher. |
| |
Oven Racks |
| ||
• Before replacing your oven light bulb, disconnect the |
| ||
Remove the oven racks |
| ||
electrical power to the range at the main fuse or circuit |
| ||
before operating the Self- |
| ||
breaker panel. |
| ||
Clean cycle. Leaving the |
| ||
• Make sure oven and bulb are cool. |
| ||
racks in place could cause |
| ||
|
| ||
| discoloration, and, if food |
| |
Painted and Body Parts, and | is spilled into the tracks, |
| |
could causes the racks to become stuck. If left, clean by using | |||
Decorative Trim | a mild, abrasive cleaner. Rinse with clean water and dry. | ||
|
|
For general cleaning, use a cloth with hot and soapy water. | If the racks are cleaned in the | |
will turn slightly blue and the finish will be dull. After the | ||
For more difficult soils and | ||
detergent directly onto the soil. Leave on soil for 30 to 60 | ||
the sides of the racks with wax paper or a cloth containing a | ||
minutes. Rinse with a damp cloth and dry. DO NOT use | ||
small amount of oil. This will make the racks glide easier into | ||
abrasive cleaners on any of these materials; they can scratch. | ||
the rack tracks. | ||
|
Stainless Steel Surfaces (on some
models)
Do not use a steel-wool pad; it will scratch the surface.
1.Shake bottle well.2.Place a small amount of Stainless Steel Appliance Cleaner or polish on a damp cloth or damp paper towel.
3.Clean a small area, rubbing with the grain of the stainless steel if applicable.
4.Dry and buff with a clean, dry paper towel or soft cloth.5.Repeat as necessary.Note: If a mineral
- 26 -