OPERATION (OPTIONS)

SETTING OVEN LOCKOUT FEATURE

The START pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door, prevents the Warming Drawer and most oven controls from being turned ON. It does not disable the clock, timer or the interior oven light.

To activate the Oven Lockout feature:1.Press and hold START for

 

 

 

3 seconds.

 

 

 

 

 

 

2. 2 beeps will sound, DOOR

 

 

 

LOCKED will flash in the display.

 

 

 

Once the oven door is locked the

 

 

 

DOOR LOCKED indicator will stop

English

 

 

flashing and remain on along with
To reactivate normal oven operation:

 

 

 

the lock icon( ) light.

1.Press and hold START for 3

 

seconds. A beep will sound

Español

2 times. The DOOR LOCKED will
continue to flash until the oven

 

 

door has completely unlocked and

 

the lock icon( ) light will clear.

 

2. The oven is again fully operational.

CHANGING HOUR MODE ON CLOCK(12hr, 24hr)

Your control is set to use a 12-hour clock. If you would prefer to have a 24-hour time clock, follow the steps below.

Changing between 12 or 24 hour time of day1.Press and hold COOK & WARM pad for 3seconds. OPt will be displayed.2.Press 1. The display will show CLO 12H.3.Press 1 to switch between the 12H and 24H.4.Press START to accept the desired change.

SETTING TEMPERATURE UNIT — FAHRENHEIT OR CENTIGRADE

COOK & WARM pad control the Fahrenheit or Centigrade temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Centigrade. The oven has been preset at the factory to display in Fahrenheit.

To change display from Fahrenheit to Centigrade or Centigrade to Fahrenheit:1. Press COOK & WARM for 3 seconds.2.Press 2. The display will showUnit F.3.Press 2 to switch between the F and C.4. Press START to accept the desired change.

SETTING BEEPER VOLUME

The beeper volume feature allows you to adjust the volumes to a more acceptable volume. There are three possible volume levels.

To set beeper volume

1. Press COOK & WARM for 3 seconds.

2.Press 3. The display will showBEEP Hi.3.Press 3 to switch beeper volume ( Hi, Lo, and OFF ).

4. Press START to accept the desired change.

- 14 -