OPERATION (OPTIONS)

SETTING PREHEATING ALARM LIGHT ON/OFF

The interior oven light automatically turn on when the oven door is opened.

When oven reaches set-temperature after preheat, the oven notifies preheat-end by flashing oven lamp until door is opened.

You can activate or deactivate smart oven light feature. Default Setting is on.To set smart oven light on/off

1. Press COOK & WARM for 3 seconds.

2.Press 4. The display will show PrEOn.3.Press 4 to switch between the On and OFF.4. Press START to accept the change.

SETTING CONVECTION AUTO CONVERSION FEATURE

When using convection bake, the Convection Auto Conversion feature will automatically convert entered regular baking temperatures to convection baking temperatures.

This feature is activated so that the display will show the actual converted (reduced) temperature. For example, if you enter a regular recipe temperature of 350°F and press the START pad, the display will show the converted temperature of 325°F.

To set the feature ON/OFF1. Press the COOK & WARM for 3 seconds.2.Press 5. The display will showAuto On.3.Press 5 to switch between the On and OFF.

4. Press START to accept the desired change.

THERMOSTAT ADJUSTMENT

The temperature in the oven has been preset at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

The oven temperature can be adjusted from ±35°F(±19°C).

Note: The thermostat adjustments made with this feature will just change Bake, Convection Bake and Convection Roast temperature.

To increase the oven temperature:1.Press and hold BAKE for 3 seconds.2.To increase the temperature use the number pads to enter the desired change.(Example 20°F : 2 and 0). 20° will be displayed.

3. Press START to accept the temperature change and the display will return to the time of day. Press CLEAR/OFF to reject the change if necessary.

To decrease the oven temperature:

1.Press and hold BAKE for 3 seconds.

2.To decrease the temperature use the number pads to enter the desired change.(Example -20°F : 2 and 0) and then press BAKE once.- 20° will be displayed.

3.Press START to accept the temperature change and the display will return to the time of day. Press CLEAR/OFF to reject

the change if necessary.

English

Español

- 15 -