LG Electronics LRG30355SW Control PANEL-NON-CONVECTION Models, Bake PAD Touch this pad to select

O P E R AT I N G I N S T RU C T I O N S

CONTROL PANEL—NON-CONVECTION MODELS

Throughout this manual, features and appearance may vary from your model.

1	2	3	4	5	6	7
						9
						10
						8
11			12			13

OVEN CONTROL, CLOCK, AND TIMER FEATURES

1 SELF CLEAN PAD: Touch this pad to select	6	DELAY START PAD: Use along with COOK TIME or
self-cleaning function. See the Using the		SELF CLEAN pads to set the oven to start and stop
Self-Cleaning Oven section.		automatically at a time you set.
2 BAKE PAD: Touch this pad to select the	7	WARMING DRAWER PAD: Touch this pad and then
bake function.		touch number pads 1–3 to use the warming drawer.
3 BROIL HI/LO PAD: Touch this pad to select the	8	See the Using the Electric Warming Drawer section.
broil function.		CLOCK PAD: Press before setting the time of day.
4 DISPLAY: Shows the time of day, oven temperature,	9	TIMER ON/OFF PAD: Press to select the timer
whether the oven is in the bake, broil or self-cleaning
mode and the times set for the timer or automatic		feature.
oven operations. It will also show warming drawer	10	OVEN LIGHT PAD: Touch this pad to turn the oven
settings.
		light on or off.
NOTE: If “F– and a number or letter” flash in the
	11	CLEAR/OFF PAD: Touch this pad to cancel ALL oven
display and the oven control signals, this indicates
		operations except the clock, timer and warming
a function error code.
		drawer settings.
If your oven was set for a timed oven operation	12	NUMBER PADS: Use to set any function requiring
and a power outage occurred, the clock and all
		numbers such as time of day on the clock, timer,
programmed functions must be reset.
		oven temperature, internal food temperature, start
The time of day will flash in the display when there		time and length of operation for timed baking and
has been a power outage. Reset the clock.		self-cleaning.
If “Err” appears in the display, you have tried to set a	13	START PAD: Must be touched to start any cooking or
time or temperature outside of the control’s limits.		cleaning function, and warming drawer settings.

Touch CLEAR/OFF pad and enter a new setting.

Touch the CLEAR/OFF pad. Allow oven to cool for one hour. Put oven back into operation. If function error code repeats, disconnect power to range and call for service.

5COOK TIME PAD: Touch this pad and then touch the number pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

12