COMPONENTS |
| TEST PROCEDURE |
| RESULTS | ||
|
|
|
|
|
|
|
RELAY | Check for continuity of relay with an | Normal: Approx. | ||||
| ||||||
| ON: 0 ohm | |||||
| (Remove lead wires from relay and | |||||
| OFF: ∞ | ohms | ||||
| operate the unit.) | |||||
| Abnormal: Infinite or several | |||||
|
|
|
|
| ||
|
|
|
|
|
| ohms. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Relay 2
FAN MOTOR | Measure the resistance. |
| Normal: Approx. 50 ~ 150 ohms |
(Wire leads removed) |
| ||
| Abnormal: Infinite or several | ||
|
|
| |
| B(BK) |
| ohms. |
| A(RD) |
|
|
| C(WH) |
|
|
|
|
|
|
TURNTABLE MOTOR
(Wire leads removed)
Measure the resistance.
Normal: Approx. 2 ~ 4K ohms
Abnormal: Infinite or several ohms.
NOTE : • A MICROWAVE LEAKAGE TEST MUST ALWAYS BE PERFORMED WHEN THE UNIT IS SERVICED FOR ANY REASON.
•MAKE SURE THE WIRE LEADS ARE IN THE CORRECT POSITION.
•WHEN REMOVING THE WIRE LEADS FROM THE PARTS, BE SURE TO GRASP THE CONNECTOR, NOT THE WIRES.
