LG Electronics LSC27990TT How to remove and replace parts, Care and Maintenance, Ice storage bin

Care and Maintenance

Freezer compartment lamp

How to remove and replace parts

NOTE

•Dismantling is done in the reverse sequence of assembly.

Be sure to unplug the power plug before dismantling and assembly. Never apply severe force to dismantle parts. Parts may be damaged.

To remove the lamp cover, separate the shelf	12
over the lamp cover and pull the lamp cover
forwards ➁ while pressing the bottom side of
the lamp cover upwards ➀. Turn the bulb

counterclockwise.

Use a 40-watt bulb (max.) which can be purchased at a service center.

Freezer compartment shelf

Door rack and support

Ice storage bin

After dispenser is used

To remove a shelf, push the shelf to the left , lift the left part of the shelf a bit , lift the right part up ➂ , and take it out.

Lift the door rack holding both sides and pull it out .

Hold the ice storage bin as shown in the right figure and pull it out while slightly lifting it .

Do not dismantle the ice storage bin unless it is necessary.

Use both hands to remove the ice bin to avoid dropping it.

The water collector has no self-draining function. It should be cleaned regularly. Remove the cover by pulling the front side of water collector cover and dry it with a cloth.

1 2 3

2

1

41