RS-232C Controlling the Multiple Product
Transmission / Receiving Protocol
41. Power saving(Command : f I)
▲
To set the Power saving mode.
Transmission
[f][I][][Set ID][][Data][Cr]
Data 0 : Off
1:(static level 1)
2:(static level 2)
3:(static level 3)
Acknowledgement
[I][][Set ID][][OK/NG][Data][x]
42. Power Indicator (Command : f o)
▲
To set the LED for Power Indicator
Transmission
[f][o][][Set ID][][Data][Cr]
Data 0 : Off
1: On
Acknowledgement
[o][][Set ID][][OK/NG][Data][x]
43. H Position (Command : f q)
▲
To set the Horizontal position
Transmission
[f][q][][Set ID][][Data][Cr]
*The data range is from 00 to 64(in Hex)
• Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[q][][Set ID][][OK/NG][Data][x]
A24
