LG Electronics MFL39817303 Fixing Installation Plate, Drill a Hole in the Wall, Type

Installation

FixingInstallationPlate

The wall you select should be strong and solid enough to prevent vibration

1.Mount the installation plate on the wall with type "A" screws. If mounting the unit on a concrete wall, use anchor bolts.

•Mount the installation plate horizontally by aligning the centerline using a level.

2.Measure the wall and mark the centerline. It is also important to use caution concerning the location of the installation plate-routing of the wiring to power outlets is through the walls typically. Drilling the hole through the wall for piping connections must be done safely.

<Type 1>

Capacity(Btu/h)		Distance mm(in)
	A	B	C	D
SE1 (9k, 12k)	70(2.8)	110(4.3)	90(3.5)	110(4.3)
S8 (18k, 24k)	100(3.9)	122(4.8)	240(9.5)	122(4.8)

3.Install after removing one of the indicated cutting phase according to the installation location of the indoor unit's piping.

Installation Plate

Chassis

Hook

<Type 1>	Type “A”
	Installation Plate
Chassis
Hook
<Type 2>	Type “A”

D		Installation plate	B
Ø70mm	C		A	Ø70mm
	Left rear piping	<Type 1>	Right rear piping

	Installation plate
Ø70mm		Ø70mm
133mm	<Type 2>	100mm
Left rear piping		Right rear piping

DrillaHoleintheWall

•Drill the piping hole with a ø70mm(2.76in) hole core drill. Drill the piping hole at either the right or the left with the hole slightly slanted to the outdoor side.

	WALL
Indoor	Outdoor
	5-7mm	(3/16"~5/16")

12Room Air Conditioner