Getting Started with Your Phone
Removing the Battery
1.Turn the phone off.
2.Use the fingertip cutout at the bottom of the phone to pull the back cover off.
3.Use the fingertip opening near the bottom of the battery compartment to lift the battery out.
Charging with USB
You can use your computer to charge your phone. To be able to charge with the USB cable, you may need to have the necessary USB Driver installed on your PC first. Connect one end of the USB cable to the Accessory/Charger Port on your phone and the other end to the USB port on your PC.
NOTE
Battery Charge Level
You can find the battery charge level 
at the top right corner of the LCD screen. When the charge level becomes low, the battery sensor sounds a warning tone, blinks the battery icon, and/or displays a warning message. As the charge level approaches empty, the phone automatically switches off without saving.
Signal Strength
Call quality depends on the signal strength in your area. You can tell how much signal strength you have by the number of bars next to the signal strength icon 
: the more bars, the stronger the signal. If you’re having problems with signal quality, move to an open area or, when inside a building, try moving near a window.
Battery Temperature Protection
If the battery gets overheated, the phone will automatically turn off. When you turn the phone back on, a message pops up alerting you that the phone was powered off for your safety.
Powering your phone on/off
Press and hold the PWR/ END Key until the screen lights up.
Press and hold the PWR/ END Key until the display turns off.
12
