Configuration Options via GUI (Cont.)
Date and Time Configuration
By default, the OAT100R is synchronized with an NTP server and configured for the US Central time zone. If the OAT100R is connected to the Internet, the NTP client will periodically update the time setting on the OAT100R. If the OAT100R is not connected to the Internet, you also have the option to disable NTP synchronization and specify date and time data manually.
1.Click on the down arrow at the right of the Time Zone field in the Time Configuration section of the System Setup screen, and select the appropriate time zone from the drop- down list of options.
2.Select the appropriate NTP
Note: Per your selection, certain of the Time Configuration fields will become inaccessible/ grayed out. If NTP is enabled, Data and Time fields will be grayed out; if NTP is disabled, the NTP Server field will be grayed out.
3.The next step depends on whether you enabled or disabled NTP:
•If you enabled NTP, type the IP address of the NTP server in the NTP Server field.
•If you disabled NTP, complete the Date and Time fields to manually specify the date and time for the OAT100R. Click on the down arrow at the right of each field (Year, Month, Day, Hour, Minute) to select the appropriate value from the
4.When you have completed the fields as required, click on the Set button at the bottom of the Time Configuration section.
If you successfully changed the OAT100R time configuration, the system will display
at the bottom of the System Information display. The System Information display will also show the updated information in the Time Zone and Current Time fields, as applicable.
5.Click on the Reset button in the System Reset section of the System Setup screen if you are ready to reset the system immediately (see “Reset the System” below for further information).
Note: If you intend to modify additional configuration settings during the current session, you may wait until all changes are complete before you reset the system.
Reset the System
1.Click on the Reset button in the System Reset section of the System Setup screen.
2.The system will display a
•Click OK to initiate a reset of the OAT100R. The reset process, during which each of the tuners will also be reinitialized, may take up to two minutes, after which the system resumes normal operation.
•Click Cancel to return to the System Setup screen without resetting the OAT100R.
34 |