Configuration Options via GUI (Cont.)
(Continued from previous page)
2.When you have completed the assignments, click on the Set button at the bottom of the Tuner column.
Note: The system will display an error message and will not allow you to continue if you attempt to map one tuner to multiple streams.
3.If no errors (i.e., duplicate tuners) are detected, the system will display a
•Click OK to confirm and apply the new assignments.
•Click Cancel to return to the MUX Setup screen without saving your changes.
If you successfully change the tuner/output assignments, the system will display 
below the MUX Setup screen. This operation typically takes up to 20 seconds
OAT100R Maintenance Options
The Maintenance screen enables you to update firmware and reset the system. To access the Maintenance screen, click on Maintenance in the options panel at the left of the screen.
Typical
Maintenance
Screen
36 |