
 IMPORTANT SAFETY INSTRUCTIONS
Read these instructions. Keep these instructions.
Heed all warnings. Follow all instructions.
Warning
This wall mount should be installed by a trained  | Do not install the product where the weight  | |
and experienced installer designated by the  | ||
cannot be supported.  | ||
retailer. | ||
If the strength of the location where the wall  | ||
Having the product installed by a non-  | ||
mount is installed is not strong enough, it can  | ||
specialized installer is very dangerous and can  | ||
fall off and cause an injury.  | ||
cause damage or injury.  | ||
  | ||
Use a trained and experienced installer to  | After installing the wall mount, do not hang  | |
move or replace the wall mount, if needed.  | ||
on the product or apply severe impact to the  | ||
Installation requires special techniques. Moving  | ||
product. | ||
or installing the product on your own can cause  | ||
The product can fall off and cause injury.  | ||
serious safety issues.  | ||
  | ||
When installing the wall mount, never hang the  | 
  | |
power or signal cable on the rear side the TV.  | 
  | |
The cord can be damaged and cause a fire, an  | 
  | |
electric shock, or damage to the product.  | 
  | |
Caution  | ||
Install the product according to the | When installing the product or adjusting the  | |
directions in the user manual.  | height of the product after installing, always  | |
If the product is not installed based on the  | do so with 2 people. | |
directions in the user manual, it can cause a  | Working alone can cause the product to fall off  | |
serious injury or damage to the product.  | and result in injury or damage to the product.  | |
During the installation, check the type of wall  | When drilling holes in the wall, always use a  | |
material and use the sealed anchor and  | drill bit and drill of designated diameter. Also  | |
screw if the conditions comply.  | follow the designated directions for the  | |
If you do not use the designated anchor or  | depth of the hole. | |
screw, the mount may not be able to withstand  | If the product is installed without following the  | |
the weight of the product and cause a safety  | designated method, the product may be  | |
issue.  | unstable and cause a safety issue.  | |
Do not wipe the product with a wet towel and  | 
  | |
do not use any heater or humidifier below  | Do not install the product near any object  | |
where the product is installed.  | that may cause vibration.  | |
If water flows into the product or if moisture and  | Do not install the product near any high  | |
heat are applied to the product, it can cause a  | voltage power cable or power source. | |
fire, an electric shock, or problem to the product.  | 
  | |
Unplug the power cord from the power outlet  | Do not install the product with bare hands.  | |
before installing the product.  | Always wear proper work gloves.  | |
If you install the product with the power cord  | ||
It can cause an injury. | ||
plugged, it can cause an electric shock or a fire.  | ||
  | ||
Do not allow the video connectors connected  | 
  | |
to the display to press against the wall. Use  | 
  | |
the included   | 
  | |
Only use attachments/accessories specified by  | 
  | |
the manufacturer.  | 3  | 
ENGLISH