LG Electronics OSW100 install manual How to Attach the Brackets for the Product to the TV, English

2How to Attach the Brackets for the Product to the TV

-- If the screws are not fully tightened when you fix the top and the bottom wall mount, check the length of the screws and tighten them again.

-- Always install the display with 2 or more people.
	-- Work procedure
VESA Screw	1. Remove the two VESA screws from
	upper back of TV when in an upright
	position.

ENGLISH

Hanger

Screw for attaching the hanger

2.Use the screws for attaching the hanger to tighten the hanger as shown.

-- Tighten the screws for attaching the hanger until they are securely attached to the TV set.

-- Use the + driver (manual or motorized) when tightening the screw.

Stand

Screw of

Stand

bottom wall mount

Screw of Stand

3. Remove the four stand screws tightened at the bottom of the TV set to detach the stand.

-- Place the TV on a table with the screen facing up. Make sure that you place it on a flat surface covered with a soft cloth or cushion to protect TV set from scratches.

*CAUTION

-When detaching the stand, make sure to hold it firmly while removing

the screws. Otherwise, it may fall. -- The four stand screws removed will be

used to attach the bottom wall mounts.

4.Use the 4 stand screws to tighten the bottom wall mount as shown.

-- Tighten the stand screws and bottom wall mount until they are securely attached to the TV set.

-- Use the + driver (manual or motorized) when tightening the screw.

5