CYCLE OPTION BUTTONS
Your dryer features several additional cycle options to customize cycles to meet your individual needs. Certain option buttons also feature a special function (see the following page for details) that can be activated by pressing and holding that option button for 3 seconds.
To Add Cycle Options to a Cycle:
1Turn on the dryer and turn the cycle selector knob to select the desired cycle.
2Use the cycle settings buttons to adjust the settings for that cycle.
3Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display.
4Press the START/PAUSE button to start the cycle. The dryer will start automatically.
ANTI BACTERIAL
This option will add a high heat setting
to reduce bacteria. It can only be used with the hEAVY DUTY, COTTON/
TOWELS, and NORMAL cycles.
NOTE: Do not use this cycle with delicate fabrics.
Certified by NSF
NSF International (formerly the National Sanitation Foundation), certifies that ANTI BACTERIAL Option reduces 99.9% of bacteria on laundry, and none of bacteria will carry over onto the next laundry load.
WRINKLE CARE
Selecting this option will tumble the
load periodically for up to 3 hours after the selected cycle, or until the door
is opened. This is helpful in preventing wrinkles when you are unable to immediately remove items from the dryer.
DAMP DRY BEEP
With this option, the dryer will beep
when the load is approximately 80% dry. This allows you to remove
0
