Using the Home Menu
From the Home Menu screen you can access all the Media (HDD, DISC) for playback and recording of the recorder.
1.Press HOME to display the Home Menu screen.
2.Use the v / V and ENTER buttons to select a media you want. Options appears.
3.Use the v / V and ENTER buttons to select the option you want.
4. To exit the HOME menu, press HOME.
TV (HDD): Returns to live TV viewing for HDD recording.
TV (DVD): Returns to live TV viewing for DVD recording.
TITLE LIST: Displays the Title List menu.
MOVIE: Plays back the movie of the
MUSIC: Displays Music (or Audio CD) menu.
PHOTO: Displays Photo menu.
Initial Settings
In this menu system, there are several ways to customize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings.
General Operation
1.Press SETUP and the Setup menu appears.
2.Use v / V to select the desired option.
3.While the desired item is selected, press B to move to the second level.
4.Use v / V to select the second desired option.
5.Press B to move to the third level.
6.Use v / V to select the desired setting then press ENTER to confirm your selection.
Some items require additional steps.
7.Press SETUP to exit the Setup menu.
Note:
Press b to go back to the previous level.
General Settings
Auto Programming
This recorder is equipped with a frequency synthesized tuner capable of receiving up to 88 TV channels.
Preparation:
Connect the recorder to the desired type of aerial, as shown in Connecting to the Aerial on page 11.
1.Select the [Auto Programming] option.
2.Press B to move to the third level. [Country] option is highlighted.
3.Use v / V to select a country then press B. [Start] icon is highlighted.
If your country is not listed, select [Others]
4.Press ENTER to begin the channel search. The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.
Note:
After you have connected your recorder for the very first time. If you press SETUP for initial setting, you can only set the [Auto Programming] option. Then you can set the other options.
Hookup and Settings
17
