LG Electronics S5200 manual Multiparty or conference calls, Setting up a conference call

General Functions

	Switching DTMF tones on during a call
G en
	To turn DTMF tones on during a call, press the left
e ra	soft key, and then select DTMF on. DTMF tones can
l	be turned off the same way. DTMF tones allow your
Fu n
	phone to make use of an automated switchboard.
c t i o n s	Multiparty or conference calls
	The multiparty or conference service provides you
	with the ability to have a simultaneous conversation
	with more than one caller, if your network operator
	supports this feature. A multiparty call can only be
	set up when you have one active call and one call on
	hold, both calls having been answered. Once a
	multiparty call is set up, calls can be added,
	disconnected or separated (that is, removed from the
	multiparty call but still connected to you) by the
	person who set up the multiparty call. These options
	are all available from the In-Call menu. The maximum
	callers in a multiparty call are five. Once started, you
	are in control of the multiparty call, and only you can
	add callers to the multiparty call.

Making a second call

You can make a second call while currently on a call.

Enter the second number and press the key. When the second call is connected, the first call is automatically placed on hold. You can swap between calls by pressing the left soft key then selecting Swap.

Setting up a conference call

Place one call on hold and while the active call is on, press the left soft key and then select the Conference/Join all.

Putting a conference call on hold

Press the left soft key, then select the

Conference/Hold all.

Activate the conference call on hold

Press the left soft key, then select the

Conference/Join all.

28