LG Electronics 32LH240H, SAC34026004, 42LH255H, 42LH260H MPI Card Slot / PPV Card Installation

MPI Card Slot / PPV Card Installation

The MPI card is equipped with an RF jack for antenna/cable signal source connection. The MPI card slot is also available for installing a PPV (Pay-Per-View) card.

MPI Card Removal / PPV Card Installation

1.Remove the two MPI card retainer screws.

2.Pull out current MPI card far enough so that the RF cable can be detached from the old card.

2.Detach RF cable.

3.Place new PPV card into slot and slide it in far enough to reconnect RF cable.

4.Insert card all the way into the slot making sure it is fully seated into back plane connector.

5.Replace the two card retainer screws.

ANTENNA IN

M.P. I.

RF CABLE

RF cable needs to be dis- connected to remove cur- rent card.

M.P. I.

Card Slot

206-4118 P A G E 1 9